PG300/302 Owner’s Manual
15
HOW TO SET THE BOOST
Boosted vibration adds the set boost level to the vibration level,
great for those situations when your dog does not respond to the
“conditioning” level. Determining the Boosted vibration level is a little
more difficult than vibration level setting due to the wide differences in
temperaments and vibration tolerance among the many breeds of
dogs. On average, it is normally 5 to 20 levels higher than the
“conditioning” level. It is important to have it set high enough to get the
desired response from your dog.
1. Change the mode to Momentary Mode.
(Press M/C button until “M” is displayed)
2. Change the intensity level to “0”.
3. Press S(Black) button for more than 5 seconds.
4. The intensity level will change from "0" to a flashing "1".
5. Rotate the dial to the desired boost level (1 to 60).
6. Press S(Black) button again to save and exit the boost level
changing mode.
To Next Page
Loading...
