EasyManua.ls Logo

E-Collar Technologies PG-300 - CHARGING THE BATTERIES

E-Collar Technologies PG-300
32 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
PG300/302 Owner’s Manual
CHARGING THE BATTERIES
07
Transmitter Battery Charging
Receptacle and Rubber Cover
Collar Receiver Battery Charging
Receptacle and Rubber Cover
Indicator Light is blinking “Green” under normal operation.
solid “Red” when vibration is applied.
blinking “Red” when recharging is required.
Do not allow the batteries to get hot or be fully discharged,
store at room temperature and 50% capacity charge.
1 2
3 4
The indicator light will turn solid red during charge cycles and turn
green if it is fully charged. (approximately 2 hours)
Please add this about the batteries:
Your pager is outfitted with Li Polymer batteries which requires specific
care to assure longevity. It is best not to let the battery be fully discharged
and if it does, recharge immediately or irreversible damage may occur.
Keep the units away from extreme heat and cold temperatures.

Related product manuals