13
HOW TO FIND THE PROPER
VIBRATION LEVEL
Rotating clockwise increases the
vibration level, and rotating
counter-clockwise lowers the
vibration level.
It is highly recommended that the user practices changing levels and
modes before putting the collar receiver on a dog.
Setting the correct vibration level for your dog is very important. To
set your “conditioning” vibration level, correctly put the collar
receiver on your dog (see page 9 for instructions). Let the dog get
used to the collar receiver for a couple of hours.
While watching your dog, turn the level to “0” and press the continuous
vibration button. Slowly turn the stimulation up at a rate of
approximately 2-3 levels per second. When your dog first perceives the
vibration release the button. This is your “conditioning” vibration level.
You may need to increase the “conditioning” level a few levels to get
your dog to respond at first, some dogs are more distracted and need
more vibration. The boosted level is typically 5 to 20 levels higher than
the “conditioning” level.
PG300/302 Owner’s Manual
To Next Page
Loading...
