E Instruments E4500 User Manual

130
K000000000EJ 023826A0 100714
15.8 Replacing the printer paper
Follow these instructions to change the paper roll in the printer.
4
Close the whole block of the lid of the printer,
pressing it lightly so as to hook it on to the device.
5
At this point it is possible to use the printer. See
the parameter "Print".
1
Lift the top tile, indicated by the arrow.
2
Lift the whole block of the lid completely.
3
Insert the roll of printing paper as shown in the following figures.

E Instruments E4500 Specifications

General

O2 Range	0-25%
Data Logging	Yes
Wireless Communication	Bluetooth
Accuracy	±2% of reading
Response Time	< 30 seconds
Power Supply	Rechargeable Battery
SO2 Range	0-5000 ppm
CxHy Range	0-10, 000 ppm
Measurement Range	Depends on gas
Resolution	1 ppm
Temperature Range	-4 to 1472°F (-20 to 800°C)
Operating Temperature	32 to 122°F (0 to 50°C)