E Instruments E4500 User Manual

5
K000000000EJ 023826A0 100714
11.2 Print=>Report 75
11.3 Print=>Configuration 76
11.4 Print=>Test 77
11.5 Print=>Header 78
11.6 Print=>Printer 80
11.6.1 Print=>Printer=>Pairing 81
11.7 Print=>Measures list 83
12.0 MEASUREMENTS 85
12.1 Measurements Menu 85
12.2 Measurements=>Draft 87
12.3 Measurements=>Smoke 88
12.4 Measurements=>Ambient CO 89
12.5 Measurements=>Temperature 90
12.6 Measurements=>Pressure 91
12.7 Measurements=>Tightness test 92
12.7.1 Connection of the tool tightness test kit 92
12.8 Measurements=>Tightness test=>New System 93
12.8.1 Performing tightness test according to UNI 7129 95
12.9 Measurements=>Tightness test=>Existing System 98
12.9.1 Configuration of tightness test according to UNI 11137 102
12.9.2 Performing tightness test according to UNI 11137 106
12.10 Measurements=>Tightness test=>Results of the tightness test 108
13.0 COMBUSTION ANALYSIS 110
13.1 Combustion Analysis 110
13.1.1 Startup and auto-calibration of the device 110
13.1.2 Inserting the probe in the chimney 110
13.1.3 Combustion Analysis 111
13.1.4 End of Analysis 111
13.2 Combustion Analysis - Preliminary operations 112
13.3 Combustion Analysis - Manual mode 114
13.4 Combustion Analysis - UNI 10389 mode 116
13.5 Combustion Analysis - BImSchV mode 117
13.6 Combustion Analysis - Data logger mode 118
14.0 SENSORS 119
14.1 Sensors arrangement 119
14.2 Sensor types and relevant positioning 119
14.3 Gas sensors life 120
14.4 Table of Gas sensor life 120
14.5 Expandability to 4 sensors 121
14.6 CxHy sensor for measurement of the Unburned hydrocarbons 122
14.7 Installing the CxHy sensor 122
14.8 CO
2
sensor for Carbon Dioxide measurement in combustion processes 123
14.9 Installing the CO
2
sensor 123
1
5.0 MAINTENANCE 124
15.1 Routine maintenance 124
15.2 Preventive maintenance 124
15.3 Cleaning the sample probe 124
TABLE OF CONTENTS

E Instruments E4500 Specifications

General

Brand	E Instruments
Model	E4500
Category	Measuring Instruments
Language	English