H695 Series Router User Manual
E‐LinsTechnologyCo.,Limited
Add:Bld22.,LongxiGarden,NonglinRD.,FutianDistrict,Shenzhen,518000,China
Tel:+86‐0755‐81220758Fax:+86‐755‐83700465E‐mail:sales@e‐lins.comwww.e‐lins.com
Chapter4
4 Command configuration
4.1 Router function configuration
If you need to dial-up an internet network, you can configure Router as following steps
4.1.1 Select working mode (For H695 with WiFi only)
It Includes Routing Mode, Transparent Bridge, and Gateway Mode. We advice to used Gateway mode,
default is Gateway mode.
(1) Gateway Mode: If you Router network is connected to Internet
4.1.2 WAN configuration
Click”PORT -- WAN Setting -- WAN Setting”
According to different ISP, WAN configuration include Static IP, ADSL, PPP, DHCP Mode, we usually
choose ”PPP modem” for this product.
z Select ppp(modem)
There are 4 WAN Ports.
A: For HSDPA or HSUPA version, please close WAN 1, WAN2, & WAN4, and click “save button”. Then choose
WAN3 and continue the configuration
B: For EVDO version, please close WAN 2, WAN3, & WAN4, and click “save button”. Then choose WAN1 and
continue the configuration
To Next Page
Loading...
Need help?
General