H695 Series Router User Manual
E‐LinsTechnologyCo.,Limited
Add:Bld22.,LongxiGarden,NonglinRD.,FutianDistrict,Shenzhen,518000,China
Tel:+86‐0755‐81220758Fax:+86‐755‐83700465E‐mail:sales@e‐lins.comwww.e‐lins.com
4.4 Factory default
Router supplies factory default function for user setting. It has two different modes, web reposition mode and
reposition jack mode.
4.4.1WEBmode
Click ”services” in left menu, and select ”Factory default”.
When you choose “reset factory default”, the system will display as below picture, click ”confirm”, the Router
setting will be lost and reset to factory default.
Default username: admin
Default password: 888888
Default IP address: 192.168.0.254
Default Subnet Mask: 255.255.255.0
4.4.2 R.. jack mode
You can according to 2.1 chapter about rear panel, Select a” R jack “ between in power and LAN port, used a
pen press the jack about 5 sec, it will restore the system parameter to factory default.
For example, when you forget the web manage password of Router, you can do like this.
To Next Page
Loading...
Need help?
General