H695 Series Router User Manual
E‐LinsTechnologyCo.,Limited
Add:Bld22.,LongxiGarden,NonglinRD.,FutianDistrict,Shenzhen,518000,China
Tel:+86‐0755‐81220758Fax:+86‐755‐83700465E‐mail:sales@e‐lins.comwww.e‐lins.com
After finishing the configuration, click “Save Button”, then Click “Reboot Button”.
The follow item must be configed with related parameters, which is from your network provider.
Username:
Password:
Dial number:
AT Strings:
A:Take for example of “China Mobile Telecom”, the configuration is as follows.
Username: wap
Password: wap
Dial number: *99***1#
AT Strings:
AT+CSQ OK AT+CGDCONT=1,”IP”,”CMNET” OK
B: Take for example of “China Unicom”, the configuration is as follows.
Username: card
Password: card
Dial number: #777
AT Strings:
AT+CSQ OK AT\&D2 OK
Notes: This setting is just for Network Provider China Mobile or China Unicom. Please confirm with
your Network Provider for the right local parameters.
The following table is china common setting from different ISP
ISP
Dial-up
Number
Username password AT Strings initialization commands
China mobile *99***1# wap wap AT+CSQ OK AT+CGDCONT=1,”IP”,”CMNET” OK
China unicom #777 CARD CARD AT+CSQ OK AT\&D2 OK
Note: “OK” must capital letters in Extra initialization command
4.2 Config VPN
For select this function, you Can configure Router as client and server, how to configure VPN in details?
To Next Page
Loading...
Need help?
General