FRONT SUSPENSION AND STEERING
Page E-9
Repair and Service Manual
Read all of Section B and this section before attempting any procedure. Pay particular attention to all Notes, Cautions and Warnings
Install inner wheel bearing (4) and new grease seal in
hub and mount hub to spindle. See ‘Hub Replacement’
on page E-8.Adjust bearing. See ‘Wheel Bearing Adjust-
ment’ on page E-3.
Replace the dust cap (7).
Lower vehicle per SAFETY section and tighten front
wheel(s) per WHEELS AND TIRES section.
Fig. 11 Wheel Bearing Replacement
2
3
Front of Vehicle
4
7
6
1
5