EAE EE-6503V2 - OPERATION INSTRUCTIONS; Operational Precautions and Controls; Raise and Lower Procedures

Installation, Operation and Parts Manual
EE-6503V2
17
Turn on the power switch
Push UP button
The lift is raised
Push the DOWN button
The lift is lowered
Push the DOWN button
Stop lowering at safety height
OPERATION INSTRUCTIONS
5.1 Precautions
5.1.1 Check all connections of oil hose. Only when there is no leakage, the lift can start work.
5.1.2 The lift, if its safety device malfunctions, shall not be used.
5.1.3 It shall not lift or lower an automobile if its center of gravity is not positioned midway of the runways.
5.1.4 Operators and other personnel concerned should stand in a safety area during lifting and lowering process.
5.1.5 When runways being raised to the desired height, switch off the power and lock the button with a padlock to prevent any wrong
operation done by unconcerned people.
5.2 Operation instructions
5.3 Flow chart for operation
Pos.
Name
Function
FA
Alarm buzzer
Safety warning
SB1
UP button
Control the rising movement
SB2
DOWN I/DOWN II button
Control the lowering movement
SB
Emergency stop
Cut operation power in emergency case
HL
Power indicator
Show if electricity is connected
QS
Power switch
Control main power
Raising
Lowering