EAE ORIA - Page 11

!
Product Manual Oria Thermostat
EAE KNX Oria Thermostat Oria Thermostat PM R1.0
©EAE!Technology!! ! ! ! www.eaetechnology.com!! ! ! Sayfa!11!/!50!
!
!
Shutter
Rocker can control shutter,
venetian blind, blind, roller and
awning. (For more information
Chapter 4.2.1.3)
Value Operation
Rocker buttons can send
predefined values from different
data types. (For more information
Chapter 4.2.1.4)
Table 4
Rockers also have status LEDs which can be configured to indicate state of the operation that is configure.
4.2.1.1.1 Switch'
Selecting “Switch” as “Rocker Function“ enables to send 1 bit On(1)/Off(0) telegrams to the group address that
is linked to respective communication object. Status LEDs can be configured to notify the current status of
operation directly with buttons or using communication objects for confirmation to show current status.
Figure 4
4.2.1.1.1## Parameters#
Parameter
Setting
Description
Mode of Buttons
Left Button On Right Button Off
Left Button Off Right Button On
Select which button is ON button and which
button is OFF button
Function of LED
LED permanently Off
LED always Off
LED permanently On
LED always On
Status Indication
Status LED of last pressed rocker button is on,
other rocker button is off. If “Separate Comm
Object” parameter selected as “Enable” status
LEDs will wait for confirmation from
communication object before changing state.
Inverted Status Indication
Status LED of last pressed rocker button is off,
other rocker button is on. If “Separate Comm
Object” parameter selected as “Enable” status
LEDs will wait for confirmation from
communication object before changing state.