!
Product Manual Oria Thermostat
EAE KNX Oria Thermostat Oria Thermostat PM R1.0
©EAE!Technology!! ! ! ! www.eaetechnology.com!! ! ! Sayfa!22!/!50!
!
!
4.2.2.2.1# Parameters#
Darker(Short Press Off)
Brighter(Short Press On)
Darker/Brighter (Short Press Toggle)
Select push button dim operation. (For
more information Chapter 4.2.2.2)
300ms/ 400ms/ 500ms/ 600ms/ 800ms
/
1s
/
1.2s
/
1.5s/ 2s
/
3s
/
4s
/
5s
/
6s
/
7s
Time interval to switch from
“switch/toggle mode” to “dimming mode”.
Select dimming type. ( For more
information Chapter 4.2.2.2)
%100
/
%50
/
%25
/
%12.5
/
%6.25
/
%3.13
/
% 1.56
Visible when dimming type is Step Wise.
Selects the dimming resolution that will be
sending at every “Step Send Interval”.
300ms/ 400ms/ 500ms/ 600ms/ 800ms
/
1s
/
1.2s
/
1.5s/ 2s
/
3s
/
4s
/
5s
/
6s
/
7s
Visible when dimming type is Step Wise.
Selects the time interval to send dimming
increase/decrease values
Last transmitted command “on” -> LED on
Last transmitted command “off” -> LED off
If “Separate Comm Object” enabled, status
LEDs will wait for confirmation before
changing status.
Inverted Status Indication
Last transmitted command “on” -> LED off
Last transmitted command “off” -> LED on
If “Separate Comm Object” enabled, status
LEDs will wait for confirmation before
changing status.
Status LED of the pressed push button will
be on for the time period selected at
“Light Duration of LED” parameter at
“General” tab.
Only visible when “Function of LED”
selected as “Status Indication” or
“Inverted Status Indication”. This
communication objects is the input of
confirmation for status LEDs. If selected
“Enable” respective communication object
should be linked to an appropriate group
address.