25 EN
Intended Use
• The device is a multi-purpose power tool and, depending on which tool attachment
is used, it is intended to be used for various DIY and modelling tasks such as milling,
drilling, grinding, separating, engraving, polishing and profi ling natural wood, wood
composite, plastic and soft metal.
• The device is for personal use only and is not intended for commercial applications.
• Use the device only as described in the instructions. Any other use is deemed to be
improper. Improper use, alterations to the device or the use of components which
have not been checked and approved by the manufacturer may cause unforesee-
able damage and injuries!
• Any non-designated use and all actions on the device which are not described in
these instructions and the failure to follow the safety instructions and other notes in
these instructions represent a non-permitted misuse which falls outside the statu-
tory liability limits of the importer and manufacturer.
• The following are excluded from the warranty: all defects caused by improper han-
dling, damage or unauthorised attempts at repair. This also applies to normal wear
and tear.
General Power Tool Safety Warnings
WARNING: Read all safety warnings and all instructions. Failure to follow
the warnings and instructions listed below may result in electric shock, fi re and/
or serious injury.
Save all warnings and instructions for future reference.
The term "power tool" in all of the warnings listed below refers to your mains op-
erated (corded) power tool or battery operated (cordless) power tool.
This device is not intended to be used by people (including children) with limited
sensory or mental capabilities or who lack the necessary experience and / or
knowledge. Children must be supervised to ensure that they do not play with the
device.
1) Work Area Safety
a) Keep your work area clean and well lit. Cluttered or dark areas invite accidents.
b) Do not operate the power tool in potentially explosive atmospheres contain-
ing fl ammable liquids, gases, or dusts. Power tools create sparks which may
ignite the dust or fumes.
c) Keep children and bystanders away while operating the power tool. Distrac-
tions can cause you to lose control of the device.
d) Use clamps or another practical way to secure and support the workpiece to
a stable platform. Holding the workpiece by hand or against your body leaves it
unstable and may lead to loss of control.
2) Electrical Safety
a) The power tool plug must match the outlet socket. The plug may not be modi-
fi ed in any way. Do not use any adapter plugs with earthed (grounded) power
tools. Unmodifi ed plugs and matching outlets will reduce risk of electric shock.
03906_de-gb-fr-nl_A5_V2.indb 2503906_de-gb-fr-nl_A5_V2.indb 25 18.08.2015 09:40:4518.08.2015 09:40:45
To Next Page
Loading...