EN 32
No. Illustration Description Quantity Ø
17 Green abrasive discs (fi ne grain size) 5 20 mm
18
Red abrasive discs (coarse grain size) 5 20 mm
19
Cutting discs 8 24 mm
20
Polishing felt pads 2
25 mm
13 mm
21
Collet (mounted if necessary) for the at-
tachments 25 – 31
13.2 mm
22
Collet for the engraving attachments 23,
24
12.4 mm
23
Engraving attachment (cone) 1
approx.
1.4 mm
24
Engraving attachment 1 2.2 mm
25
Polishing tips 5
approx.
8 –
10 mm
26
Drill bit 1 3.2 mm
27
Nylon brush 1 5 mm
28
Steel brush for removing rust (only suit-
able for metal!)
122 mm
29
Pin with screw
for fi xing cutting discs and abrasive discs
1
Shank:
3.2 mm
30
Pin for fi xing the polishing felt pads 1
Shank:
3.2 mm
31
Grinding roller for fi xing abrasive sleeves 112.8 mm
Device Overview
Motor unit
a Mounting clip
b On/Off switch
c Speed controller
d Gripping surface
e Clamping nut
f Spindle lock
g Ventilation slots
a
b
c
d
e
fg
03906_de-gb-fr-nl_A5_V2.indb 3203906_de-gb-fr-nl_A5_V2.indb 32 18.08.2015 09:40:4618.08.2015 09:40:46
To Next Page
Loading...