First use
To ensure optimum performance from your camera, please follow
the steps below when using the camera for the first time:
Step 1: Insert and charge the battery
Before using the product for the first time, make sure that it is fully
charged.
• Open the battery compartment cover, insert the battery and
charge it for between 5 and 6 hours.
• Keep the device away from children during charging.
• Ensure that the camera is turned off during charging.
• If the camera switches on automatically when connected to a
power source, please turn it off to ensure the battery can be
fully charged.
• Product should only be charged via the USB port of a
computer or USB power supply with a maximum output of
1050mAh.
• Disconnect the USB cable connected to the product before
using it.
• The battery life is up to 90 minutes under optimal conditions
and is dependent on the settings used and the outside
temperature.
To Next Page
Loading...
