Eaton 9135 - Reset or Disable LCM

Operation
Eaton 9135 5000/6000 VA UPS User’s Guide 164201726—Rev 4 www.eaton.com/powerquality 37
Reset or Disable LCM
To reset or disable the LCM if any messages display:
l
For temporary reset: press the button for at least three seconds while in the Status and Alarm menu to
temporarily cancel the alarm status.
The alert will be repeated twice every 30 days.
l
For permanent reset: press the button for at least three seconds while in the LCM warning menu to
permanently cancel the LCM event.
At any time:
l
To disable all LCM messages, select disable all while in the LCM menu.
Be careful: if you disable all LCM messages, you will not be aware of any LCM events that can
happen on the UPS.
(