Eaton 9395XC - Figure 63. Parts of the Touch Screen

Eaton 9395XC UPS 1200kW/1200kVA, 1350kW/1350kVA or 1500kW/1500kVA 164001079—Rev 01 105
Figure 63. Parts of the Touch Screen
Settings Overview Timeline Meters Control
Table 25. Parts of the Touchscreen
A
The Status bar automatically displays the UPS status, current time and date, active alarms, active notices, and load percent
and battery run time for the UPS.
The status bar is shown on multiple screens. When the header is required for a screen, the header provides the following
information: The active alarms count (when applicable), status/sub status, battery percent load, battery percent remaining
and whether voltage is L-L(Line to Line) or L-N (Line to Neutral).
The Status bar will appear red when there are active alarms. For more information about alarms and notices, see
paragraph 7.3.3 Timeline Screen.
Status/Sub-Status
Battery Percent Remaining
Battery Percent Load
Active Alarm Count
Date/Time
L-L or L-N Voltage
B
Header Bar identifies the screen selected, drop-down filter, search function, screen help and security level indicator
(padlock icon), After touching the padlock in the upper right corner, the numerical keypad appears to allow entry of the
system access pass code for operation (see Figure 60 andTable 24 for Security Levels and Functions.
Menu drop-down
(alternate select screen)
Current Screen Selected
Filter Selection
Search
Help
Security Level
Padlock
C
The Power Flow diagram. The overview screen on-line diagram is an illustration of the UPS power flow. The Rectifier (AC/
DC), Inverter (DC/AC), Battery and static switch (AC/AC) components are shown as a picture. The Maintenance bypass,
Inverter contactor and output contactor are shown as breakers. The lines are shown connecting the power devices.
UPS Operating Instructions