2. Make a visual inspection and examine that there are no signs of shipping
damages. Examine the TipNTell and refer to the instructions next to the
indicator on the package. The DropNTell indicator is located on the rear
panel of the UPS and can be verified after the next step.
3. Open the UPS package. The roof of the package is used as a ramp for
moving the UPS off the pallet.
4. Place the ramp on the floor and attach it to the pallet with nails or screws so
that it can be safely used for wheeling the UPS off the pallet.
© Eaton Corporation plc 2020. All rights reserved. Revision: 006 Document ID: P-164000493 56 (126)
Eaton 91PS/93PS UPS 8–40 kW User’s and Installation Guide
To Next Page
Loading...
