To Next PageTo Next Page
Need help?Do you have a question about the Eaton 9910-E15 and is the answer not in the manual?
Lists all components included with the UPS and EBMs.
Procedures for safely unpacking and placing the UPS unit.
Instructions for wiring installation and connecting the UPS.
Steps for connecting optional Extended Battery Modules (EBMs) to the UPS.
How to implement and connect an external emergency power-off switch.
Steps for connecting power and initiating the UPS startup sequence.
Configuration for UPS monitoring on IBM System i and AS/400.
Identification of ports and connectors on the rear of the UPS.
Overview of the UPS front panel controls and indicators.
How to navigate menus, change language, and manage LCD display settings.
Explanation of Normal, Battery, Bypass, and Standby UPS modes.
Step-by-step instructions for starting and shutting down the UPS.
Procedure for starting the UPS using battery power without utility input.
Steps for properly shutting down the UPS.
Setting the UPS to recognize the number of connected EBMs for runtime accuracy.
Connecting the UPS to IBM System i servers via specific cables.
Cable connection guide for iSeries or AS/400 systems.
Connecting the UPS to System p via serial interface.
General
