Eaton 9910-E15 - Display and Language Settings

OPERATION
EATON 9130 (9910-E15/E16) UPS Installation Guide for IBM
®
Applications S 164201783 Rev 2
19
Table 5 shows the indicator status and description.
Table 5. Indicator Descriptions
Indicator Status Description
Green
On The UPS is operating normally.
Flashing A new information message is active.
Yellow
On The UPS is in Battery mode.
Flashing The battery voltage is below the warning level.
Yellow
On The UPS is in Bypass mode.
The UPS is operating normally on bypass during High Efficiency operation.
Red
On The UPS has an active alarm or fault. See “Troubleshooting” in the UPS user's
guide for additional information.
Changing the Language
Press and hold the first button on the left for approximately three
seconds to select the language menu. This action is possible from any
LCD menu screen.
Display Functions
As the default or after 15 minutes of inactivity, the LCD displays the
start screen.
The backlit LCD automatically dims after 15 minutes of inactivity. Press
any button to restore the screen.
Press any button to activate the menu options. Use the two middle
buttons (
and ) to scroll through the menu structure. Press the Enter
(
) button to select an option. Press the
ESC
button to cancel or return
to the previous menu.