Eaton 9910-E15 - Communication Options

EATON 9130 (9910-E15/E16) UPS Installation Guide for IBM
®
Applications S 164201783 Rev 2
25
Chapter 3 Communication Options
If you want the UPS to communicate with your computer, use Table 6 to
determine which communication option is correct for your application.
Table 6. Communication Options
Application
Software Suite CD
and Serial Cable
Relay Interface Card
and Cable
IBM System it Server — X
IBM System p, OpenPowert, or xSeries
®
Server with Single Serial (TTY)
Connection
X X
IBM System pt, OpenPower, or xSeries
Server and/or Network (WebServer)
Connection (UPS as a node)
X —
IBM System p, OpenPower, or xSeries
Server with Logical Partitions (LPARs)
Not Supported
Follow the installation instructions with the Software Suite CD. This
document shows the communication option overviews. For additional
information and a current listing of supported operating systems, go to
www.eaton.com/powerquality.