Eaton 9910-E15 - System i Interface Overview

COMMUNICATION OPTIONS
EATON 9130 (9910-E15/E16) UPS Installation Guide for IBM
®
Applications S 164201783 Rev 2
26
System i Interface Overview
To connect the UPS to a System i, you need:
S An Eaton-supplied AS/400 interface cable (labeled 103004349-5501),
included with the UPS
S An IBM-supplied UPS interface cable (labeled 1827), included with
the server
Connect the cables as shown in Figure 8.
AS/400 Interface Cable
(labeled 103004349-5501)
UPS Interface Cable
(labeled 1827)
UPS
“P1-T1” UPS Port
End of Cable Labeled
“UPS”
End of Cable Labeled “AS/400”
IBM System i
Server
Figure 8. System i Interface