Eaton 9910-E15 - iSeries;AS400 Interface

COMMUNICATION OPTIONS
EATON 9130 (9910-E15/E16) UPS Installation Guide for IBM
®
Applications S 164201783 Rev 2
27
iSeries or AS/400 Interface Overview
To connect the UPS to an iSeries or AS/400 you need:
S An Eaton-supplied AS/400 interface cable (labeled 103004349-5501),
included with the UPS
Connect the cable as shown in Figure 9.
“J14” UPS Port
(location may
vary by model)
UPS
AS/400 Interface Cable
(labeled 103004349-5501)
IBM iSeries Server
Figure 9. iSeries or AS/400 Interface on an E15