Eaton DX 2000 LAN - Page 21

19
2.6.4 Electrical Specification
Model name
DX 1000 LAN
DX 2000 LAN
DX 3000 LAN
Power
1000VA/900W
2000VA/1800W
3000VA/2700W
Input
Current (Max.)
10A
20A
30A
Voltage Range
85~150VAC @ full load (55~150VAC @ half load)
Frequency Range
46 ~ 54Hz @ 50Hz system / 56 ~ 64Hz @ 60Hz system
Input Power Factor
≧0.97 @ full load
Output
Voltage
115/120VAC (sine-wave)
100V Need derating to 90% for 1k/3k
100V Need derating to 80% for 2k
110V Need derating to 90% for 2k
Frequency
Synchronizing mains input @ line mode
50/60Hz ± 0.5 Hz @ battery mode
THD
≦5% ( Linear load )
Voltage Regulation
≦2%
Overload Capacity
Line mode: 60s @ 102%~130%; 1s @ > 130%
Battery mode: 10s @ 102%~130%; 1s @ >130%
Efficiency
Line Mode
88%
Battery Mode
83%
83%
83%
Battery & Charger @ 25℃
Total battery rating voltage
36VDC
72VDC
72VDC
Backup Time (Half Load)
>14min
>14min
>11min
Recharge Time (to 90%)
5Hours
5Hours
5Hours
Charging Current (Max.)
1A
0.7A
0.7A
Discharging Current (Max.)
30A
30A
40A
Rated Charging Voltage
41.0Vdc
81.9Vdc
81.9Vdc