Eaton E Series - Safety Messages and Proper Use; Important Definitions

Description Information Corrective Action
SE 39 ADC Error 2 The Self-Supervision (routine-check No. 2)
has detected an error with determining the
measuring values.
Get in contact with our service-team.
SE 40 – reserved for future use – —
SE 41 SPI Bus faulty A hardware problem with the SPI Bus has been
detected.
Get in contact with our service-team.
7www.eaton.comE-Series Family Troubleshooting Guide)
2 Self-Supervision Messages
2.1 Self-Supervision – Error Messages