Eaton H-Max Series - Disclaimer of Warranties and Limitation of Liability

H-Max HVAC Drives
H-Max HVAC Drives MN04008004E—September 2011 www.eaton.com i
Disclaimer of Warranties and Limitation of Liability
The information, recommendations, descriptions, and safety notations in this document are
based on Eaton Electrical Inc. and/or Eaton Corporation’s (“Eaton”) experience and judgment,
and may not cover all contingencies. If further information is required, an Eaton sales office
should be consulted.
Sale of the product shown in this literature is subject to the terms and conditions outlined in
appropriate Eaton selling policies or other contractual agreement between Eaton and the
purchaser.
THERE ARE NO UNDERSTANDINGS, AGREEMENTS, WARRANTIES, EXPRESSED OR
IMPLIED, INCLUDING WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE OR
MERCHANTABILITY, OTHER THAN THOSE SPECIFICALLY SET OUT IN ANY EXISTING
CONTRACT BETWEEN THE PARTIES. ANY SUCH CONTRACT STATES THE ENTIRE
OBLIGATION OF EATON. THE CONTENTS OF THIS DOCUMENT SHALL NOT BECOME
PART OF OR MODIFY ANY CONTRACT BETWEEN THE PARTIES. In no event will Eaton be
responsible to the purchaser or user in contract, in tort (including negligence), strict liability or
otherwise for any special, indirect, incidental, or consequential damage or loss whatsoever,
including but not limited to damage or loss of use of equipment, plant or power system, cost
of capital, loss of power, additional expenses in the use of existing power facilities, or claims
against the purchaser or user by its customers resulting from the use of the information,
recommendations, and descriptions contained herein.
The information contained in this manual is subject to change without notice.
Cover Photo: Eaton H-Max HVAC Drives