Eaton SEFELEC 56-H User Manual

SEFELEC 5X Series
50-C
56-H
56-D
56-S
506-H
506-D
506-S
1000-M
PENT6833
version 1.06 - July 2020
User Manual

Eaton SEFELEC 56-H Specifications

General

Brand	Eaton
Model	SEFELEC 56-H
Category	Test Equipment
Language	English

Summary

3. SPECIFICATIONS

4. SAFETY

4.1. SECURITY WHEN WORKING ON ELECTRICAL DEVICES

Provides warnings and precautions regarding electric shock when operating devices.

4.2. SAFETY ARRANGEMENTS

Details safety measures and arrangements, including safety loops and sectioning.

5. COMMISSIONING

6. CONFIGURATION OF THE DEVICE

7. SETTING THE MEASUREMENT OF INSULATION RESISTANCE

7.1. ADJUSTING THE MEASUREMENT TIME

Explains how to adjust the measurement time parameters for insulation resistance tests.

7.2. ADJUSTING THE MEASUREMENT VOLTAGE

Details how to set and adjust the measurement voltage for insulation resistance tests.

7.3. ADJUSTMENT OF THE COMPARISON THRESHOLDS

Guides on setting Rmin and Rmax thresholds for insulation resistance measurement comparison.

8. MEASUREMENT OF INSULATION RESISTANCE

8.1. CONNECTION OF THE COMPONENT TO BE MEASURED

Provides instructions for safely connecting components for insulation resistance testing.

8.3. THE FOLLOWING ERROR MESSAGES

Lists and explains common error messages encountered during insulation resistance measurements.

9. DIELECTRIC STRENGTH TEST SETTINGS

9.1. ADJUSTING THE MEASUREMENT TIME

Explains how to adjust measurement time parameters for dielectric strength tests.

9.2. ADJUSTING THE MEASUREMENT VOLTAGE

Details how to set and adjust the measurement voltage for dielectric strength tests.

9.4. ADJUSTMENT OF IMAX, IMIN AND DELTA I DETECTION THRESHOLDS

10. PERFORMING A DIELECTRIC STRENGTH TEST

10.1. CONNECTION OF THE COMPONENT TO BE MEASURED

10.2. PRECAUTIONS TO BE OBSERVED DURING MEASUREMENT

12. SETTING THE MEASUREMENT OF GROUND CONTINUITY

12.1. ADJUSTING THE MEASUREMENT TIME

12.3. ADJUSTMENT OF THE COMPARISON THRESHOLDS IN RESISTANCE OR VOLTAGE DROP

14. SEQUENCE MODE

15. PLC INTERFACE (PROGRAMMABLE LOGIC CONTROLLER)

17. ETHERNET INTERFACE

17.1. CYBER SECURITY RECOMMENDATIONS

17.5. SETTING OF THE ETHERNET CONNECTION ON THE DEVICE

21. CARE, MAINTENANCE AND CALIBRATION