Eaton HFX Series - Service Tool Installation and Getting Started; Installation Procedure

EATON HFX Product Family Installation and Operation Manual E-ELCL-II002-E2 July 201914
7.0 SOFTWARE DESCRIPTION
Software for the HFX family of controllers is
provided in the form of the HFX Platform Support
Package. This is distributed as a .package le
(C:\Users\Public\Pro-FX) and contains
the following elements:
• Firmware les (MOT les): A separate le is
provided for each HFX controller model.
• Device description package for Pro-FX Control:
The HFX package le can be installed using the
Pro-FX Control Package Manager. Once it is
installed, any of the HFX devices can be used
within Pro-FX Control.
• HFX Service Tool: Setup.exe in the Service Tool
folder is the installation le.
• Gateway le: Gateway.cfg denes how Pro-FX
Control connects to the HFX device.
• HFX USB Driver: Pro-FX Control connects to the
HFX using USB. This is the driver to support that
connection.
• ECOM USB Driver: The Pro-FX Congure HFX
Service Tool connects to the HFX over CAN
Port 1 at 250k, using the ECOM device. This is
the driver for that device.
When updating an existing HFX Support Package,
it is necessary to update each of the above
elements except for the USB drivers, which do not
need to be updated unless explicitly mentioned
in a given release.
8.0 SERVICE TOOL - INSTALLATION AND
GETTING STARTED
8.1 Installation Procedure
8.1.1 Launch the ProFXCongure_v2.3.0.exe
8.1.2 Click Next from the Welcome screen
8.1.3 Agree to the software license and click Next
8.1.4 Choose Complete or Custom installation,
then click Next
8.1.4.1 If Custom is shown, pick which options you'd like
installed then click Next
HFX Product Family