EasyManua.ls Logo

Eaton HFX Series - Installing the Controller

Eaton HFX Series
58 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
EATON HFX Product Family Installation and Operation Manual E-ELCL-II002-E2 July 2019 19
HFX Product Family
12.5 Controller Memory
The controller utilizes an advanced superscalar
32 Bit processor operating at 200 MHz. The memory
is arranged into the following areas:
Flash 3.75 Mbyte (1.75 Mbyte reserved for IEC
application)
EEPROM 128 kbyte reserved for internal use i.e.
rmware/bootloader
RAM 256 kbyte
MRAM 32 kbyte (24 kbyte user accessible
le-system + 4kbyte redundant retain)
12.6 Calibration parameter memory
The Pro-FX Control development Environment offers
the ability to have local calibration parameters through
the use of the parameter handler included in the
Pro-FX Control standard project in the HFX templates.
For further information on how to use the Parameter
handler please review the information on the
parameter handler in the Pro-FX Control help system.
12.7 LED Operation
LED A (left-most) - Green power LED
Off ==> Not powered up
Solid on ==> Powered up and Pro-FX Control
application not running
Fast ash (100ms on, 100ms off) ==> Pro-FX
Control application running
LED B (middle) - Red MIL (Malfunction Indicator Lamp)
Pro-FX Control application running
Flashing (200ms on, 200ms off) ==> critical fault is active
Solid on ==> standard fault is active
Off ==> no fault
Pro-FX Control application not running
Fast Flashing (200ms on, 200ms off) ==> critical fault is active
Slow pulse (100ms on, 1500ms off) ==> historic fault is set
- must be manually cleared
Solid on ==> standard fault is active
Off ==> no fault
LED C (right-most) - Green user programmable LED
User programmable via System Cong I/O variable:
userLedState
Miscellaneous states
LED A Off and MIL light solid on ==> No
rmware present
MIL light will pulse briey for a bulb check on
every powerup
MIL light will retain its state for 3 seconds after
an active fault goes inactive
13.0 INSTALLING THE CONTROLLER
13.1 Product Dimensions
HFX32m & HFX48m Dimensional Data
4X
.256
6.50
4.654
118.22
7.743
196.67
5.282
134.17
8.371
212.61
2X
2.305
58.55
4X
.379
9.61
3
12
4X
.379
9.61
2.305
58.55

Table of Contents

Related product manuals