EATON HFX Product Family Installation and Operation Manual E-ELCL-II002-E2 July 20198
HFX Product Family
1.0 INTRODUCTION
The Eaton HFX product family is a series of
advanced, CAN-based controllers for use with mobile
and industrial equipment. Using a standardized
IEC 61131-3 programming environment, these
controllers enable functional control over electrically
operated components within a variety of applications
(e.g. agricultural, construction, material handling).
It is recommended that an individual have experience
with control engineering and programming within
the CODESYS 3.5 or MATLAB/Simulink & C software
environment before using this hardware.
The HFX product family is optimized for reliable
operation in severe environments, possessing
IP and temperature ratings that exceed existing
solutions from competitors. HFX controllers employ
several advanced technologies (e.g. I/O with
variable conguration architecture), enabling simple
management and enhancing both ease of use and
functionality. These controllers are intended as
both a standalone solution, or as the centerpiece to
a complete control system that can include other
CAN-based devices such as displays and keypads.
Key Acronyms and Abbreviations
CODESYS Controller Development System
FW Firmware
HW Hardware
IDE Integrated Development Environment
IP Ingress Protection
MIL Malfunction Indicator Lamp
POU Program Organization Unit
PWM Pulse Width Modulation
RTS Run Time System
SW Software
To Next Page
Loading...
Need help?
General
