Eaton HFX Series - Page 32

EATON HFX Product Family Installation and Operation Manual E-ELCL-II002-E2 July 201932
Figure 5: Current/PWM Outputs I/O Mapping tab.
This tab displays the desired current, actual current,
desired PWM duty cycle, actual PWM duty cycle,
and the binary output status.
Variables:
• desiredCurrent#_#A: This is the desired output
current for the channel.
Note: That this is only active in Current Control mode.
• measuredCurrent#_#A: This is the average current
measured over a single dither period.
• desiredDuty#_#A: This is the desired PWM duty cycle.
Note: That this is only active in PWM mode.
• actualDuty#_#A: This is the PWM duty cycle commanded by
the hardware.
• binaryOutput#_#A: This is the commanded output state of the
high or low side output (false: open or True: closed).
Note: That this is only active in Binary mode.
HFX Product Family