Eaton i-on40H - Page 150

Log Messages
Page 140
HUA Conf. ==
Hold Up Alarm confirmed by
tamper on expander n.
HUA Conf. ==ER
Hold Up Alarm has been
confirmed by a missing external
prox reader on keypad n.
HUA Conf. ==IS
Hold Up Alarm confirmed by a
tamper on internal radio sounder
n.
HUA Confirm ==
Hold Up Alarm confirmed on
keypad HUA keys.
HUA Confirm Aux #
Hold Up Alarm confirmed by open
circuit on AUX Tamp terminals on
control unit PCB.
HUA Confirm Bell #
Hold Up Alarm confirmed by open
circuit on TR terminal on control
unit PCB.
HUA Confirm RK==
Hold Up Alarm confirmed by
tamper on radio keypad.
HUA Confirm SMS
Hold Up Alarm confirmed by SMS
Control user code tamper.
HUA Confirm SRN==
Hold Up Alarm confirmed by radio
siren n tamper.
HUA Confirm VKP
Hold Up Alarm confirmed by VKP
user code tamper.
HUA Confirm WAM==
Hold Up Alarm confirmed by
tamper on WAM n.
HUA Confirm Websvr
A Hold Up Alarm was confirmed
by a user on the web browser
interface typing the password
incorrectly more than four times in
a row,
HUA Confirm Z===
Hold Up Alarm confirmed on wired
zone nn.
HUA Confirm
Hold Up Alarm confirmed on
device...
HUA Restore P#
Hold Up Alarm button has been
restored.
HUA Restore P#
Hold Up Alarm has been restored.
HUA Restore
Hold Up Alarm has been restored
HUA U-- Alarm
Hold Up Alarm confirmed on User
radio device n.
HUA U-- Low Batt
Low battery on User radio device
n.
HUD Fault Rst Z===
A hold up device fault reported on
zone n was restored.
HUD Fault Z===
A hold up device reported a fault
on zone n.
IP Cam # Err 404
HTTP error 404 from IP camera.
IP Cam # Err Auth
Login details to IP camera
incorrect.
IP Cam # HTTP Err.
HTTP error at IP camera.
IP Cam # Miss Rstr
Connection to IP cam n restored.
IP Cam # Timeout
Connection to IP cam n lost.
IP device connected
IP network device connected.
IP device disc.
IP network device disconnected.
IP Polling Fault
An Ethernet or other plug-on
module is having a problem.
IP Polling Restore
The problem with the Ethernet or
other plug-on module has been
restored.
ISN== Battery Rstr
Low battery Restored on Internal
Radio Sounder n.
ISN== Fault Rstr
Fault restored on Internal Radio
Sounder n.
ISN== Fault
Fault on Internal Radio Sounder n.
ISN== Jamming Rstr
Jamming Restored on Internal
Radio Sounder n.
ISN== Jamming
Jamming on Internal Radio
Sounder n.
ISN== Low Battery
Low battery on Internal Radio
Sounder n.
ISN== RF OK
Radio signal restored for Internal
Radio Sounder nn
ISN== RF Warning
Radio signal lost for 20 min for
Internal Radio Sounder nn
ISN== Superv Fail
Radio signal fail for 2 hours for
Internal Radio Sounder nn
ISN== Superv Rstr
Radio signal restored for Internal
Radio Sounder nn
ISN== Tamper Rstr
Tamper Restore on Internal Radio
Sounder n.
ISN== Tamper
Tamper on Internal Radio Sounder
n.
Jamming == Rstr
Jamming ceased.
Jamming ==
Jamming detected.
K== Excess Keys
Excess keys tamper at keypad n.
Key Sw Ptn # PtSet
Partition part set from keyswitch.
Key Sw Ptn # Set
Partition set from keyswitch.
Key Sw Ptn # Unset
Partition unset from keyswitch.
Key Sw System PtSet
System part set from keyswitch.
Key Sw System Set
System set from keyswitch.
Key Sw System Unset
System unset from keyswitch.
Keypad == added
New keypad added to system.
Keypad == found
New keypad found on bus.
Kpd == deleted
Keypad deleted from system.
Kpd == Jamming
Radio jamming detected at radio
keypad n.
Kpd == JammingR
Radio jamming removed at radio
keypad n.
Kpd == Low Batt
Low battery voltage at radio
keypad n.
Lid Tamper Restore
Control unit lid closed.
Lockset Z=== Set
A zone with type "lock set" was
closed. (If Inverted attribute is set
to "normal".)
Lockset Z=== Unset
A zone with type "lock set" was
opened. (If Inverted attribute is set
to "normal".)
Low Batt = Restore
Control unit battery no longer low.
Low Batt Z== Rstr
Radio detector at zone has low
battery restored.
Low Battery =
Control unit battery low.
Low Battery Z==
Radio detector at zone has low
battery.
Mask Flt Z==
Masking detected on zone while
partition unset?
Mask Rstr Z==
Masking restored on zone.
Mask Z==
Masking detected on zone while
partition set.
Missing == Rstr
Missing expander restored to bus.
Missing ==
Expander missing from bus.
Missing ==ER Rs
An External prox Reader
connected to keypad nn has been
re-connected.
Missing ==ER
An External prox Reader
connected to keypad nn has gone
missing (possibly disconnected
from the keypad).
Occupancy Set W#
Set but with Occupancy zone(s)
open.
Panel A/C Fail
AC power failure at control unit.
Panel A/C Restore
AC power restored at control unit.
Override
User overrode set fail in part
setting system.
PA U-- Low Bat
Hold up Device belonging to user
has a low battery.
Panel lid open
Control unit lid open.
Panic == Alarm
Not used.
Panic Alrm Rst P#
Not used.
Panic Z== Alarm
Not used.
Panic Z== Restore
Not used.
Partn # Rearmed
Partition n was rearmed after an
alarm by control unit.
Pend U-- Low Bat
Not used.
Pri Comms Path Flt
Primary communications path has
a fault.
Pri Comms Path Rst
Primary communications path fault
restored.
PRM Z=== Active
Perimeter zone n active.
PRM Z=== Restore
Perimeter zone n restored.
Ptn # Remote Rst
User reset partition remotely.
Remote Reset
User reset system remotely.