MN04002001E
9
March 2006
Step 4 — Parameter Groups & Default Values (Continued)
40 — OUTPUTS (Continued)
50 — DRIVE CONTROL
Modbus Groups Description Range Default
User
Settings
0202H
0203H
40.03
40.04
Digital Output
Terminal
(DO1-DCM)
Relay Output
Terminal
(RO1, RO2, RO3)
19: Final count value attained 02
03
20: Intermediate count value
attained
21: Reverse direction notification
22: Under current detection
23: Inverter RUN command state
0204H 40.05 Desired Frequency
Attained
0.0 to 400.0 Hz 0.0
0205H 40.06 Digital Output (RO4,
RO5, RO6)
same as 40.03 to 40.04 0
0206H 40.07 Digital Output (RO7,
RO8, RO9)
same as 40.03 to 40.04 0
Modbus Groups Description Range Default
User
Settings
0300H 50.01 Source of Master
Frequency
00: Master Frequency determined
by digital keypad up/down
01
01: Master Frequency determined
by keypad potentiometer
02: Master Frequency determined
by 0 to +10V input on AI1 terminal
03: Master Frequency determined
by 4 – 20 mA input on AI2 terminal
04: Master Frequency determined
by RS-485 communication interface
0301H 50.02 Source of Operation
Command
00: Operation command determined
by digital keypad
00
01: Operation command determined
by external control terminals,
keypad STOP is effective
02: Operation command determined
by external control terminals,
keypad STOP is ineffective
03: Operation command determined
by RS-485 interface, keypad STOP is
effective
04: Operation command determined
by RS-485 interface, keypad STOP is
ineffective
0302H 50.03 Stop Methods 00: Ramp to Stop 00
01: Coast to Stop
0303H 50.04 Maximum Output
Frequency
50.0 to 400.0 Hz 60.0
0304H 50.05 Motor Nameplate
Frequency
10.0 to 400.0 Hz 60.0
0305H 50.06 Motor Nameplate
Voltage
115/230V 0.1 to 255.0V 230.0
460V 0.1 to 510.0V 460.0
575V 0.1 to 637.0V 575.0
0306H 50.07 Mid-point Frequency 0.1 to 400.0 Hz 1.5
0307H 50.08 Mid-point Voltage 115/230V 0.1 to 255.0V 10.0
460V 0.1 to 510.0V 20.0
575V 0.1 to 637.0V 26.1
0308H 50.09 Minimum Output
Freq
0.1 to 20.0 Hz 1.5
0309H 50.10 Minimum Output
Voltage
115/230V 0.1 to 50.0V 10.0
460V 0.1 to 100.0V 20.0
575V 0.1 to 637.0V 26.1
030AH 50.11 Sensorless Vector
Enable
00: Disable 00
01: Enable
MN04002001E.fm Page 9 Thursday, April 13, 2006 11:11 AM
To Next Page
Loading...
