Eaton Power Xpert 9395 - Safety Warnings; IMPORTANT SAFETY INSTRUCTIONS

INSTALLATION
Power Xpert 9395 Integrated Battery Cabinet (Model 1085 and 1085HR) Installation Manual S 164201687 Rev 4 www.eaton.com/powerquality
4-10
Cabinet to UPS Negative
Terminals ()
Cabinet to UPS Positive
Terminals (+)
Interface Terminal Block TB1
and Connectors J3 And P3
(see Figure 4‐10 For details)
Battery Breaker
Ground Terminal
Inter‐Cabinet Wiring Access
to Route Interface Wires
Between Cabinets
Inter‐Cabinet Wiring Access
to Route Interface Wires
Between Cabinets
EMP Mounting Location
(if installed)
Ground Stud
Ground Stud
NOTE Use pressure and bus bar terminations as necessary for connecting cables between the UPS and battery cabinets.
Figure 4‐8. 1085HR Battery Power and Interface Terminal Locations