EasyManua.ls Logo

Eaton PowerXL DG1 Series VFD - Table 89. Instance 70 (Input) Length = 4 Bytes; Table 90. Instance 71 (Input) Length = 4 Bytes; Table 91. Instance 73 (Input) Length = 6 Bytes

Eaton PowerXL DG1 Series VFD
152 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
EtherNet/IP On-Board Communications
PowerXL DG1 Series VFD MN040010EN—May 2014 www.eaton.com 65
Input Instances
Assembly Instance 70
Table 89. Instance 70 (Input) Length = 4 Bytes
Assembly Instance 71
Table 90. Instance 71 (Input) Length = 4 Bytes
1
Refer “State transition diagram”, provided under “Control Supervisor Object” and “Drive State
table specified at end of “Input Instances” section.
Assembly Instance 73
Table 91. Instance 73 (Input) Length = 6 Bytes
1
Refer “State transition diagram”, provided under “Control Supervisor Object” and “Drive State
table specified at end of “Input Instances” section.
ByteBit 7Bit 6Bit 5Bit 4Bit 3Bit 2Bit 1Bit 0
0 Running1 Faulted
1
2 Speed Actual (Low Byte), rpm
3 Speed Actual (High Byte), rpm
ByteBit 7Bit 6Bit 5Bit 4Bit 3Bit 2Bit 1Bit 0
0 AtReference RefFromNet CtrlFromNet Ready Running2 Running1 Warning Faulted
1
Drive State
1
2 Speed Actual (Low Byte), rpm
3 Speed Actual (High Byte), rpm
ByteBit 7Bit 6Bit 5Bit 4Bit 3Bit 2Bit 1Bit 0
0 AtReference RefFromNet CtrlFromNet Ready Running2 Running1 Warning Faulted
1
Drive State
1
2 Speed Actual (Low Byte), rpm
3 Speed Actual (High Byte), rpm
4 Torque Actual (Low Byte), Nm
5 Torque Actual (High Byte), Nm

Table of Contents

Other manuals for Eaton PowerXL DG1 Series VFD

Related product manuals