Eaton PowerXL DM1 Series - Page 105

95
Chapter 6 - Pump control application
POWERXL DM1 SERIES VARIABLE FREQUENCY DRIVES MN040049EN—September 2021 www.eaton.com
Table 37. Monitor (Cont.).
M5.4
PI output
ID 22
Minimum value:
%
Maximum value:
%
Default value:
%
Description:
PI output.
M5.5
PI status
ID 23
Minimum value:
N.A.
Maximum value:
N.A.
Default value:
N.A.
Options:
0 = Stopped;
1 = Running; or
2 = Sleep mode.
Description:
PI status indication, indicates if drive is stopped, running in PI mode, or in PI sleep mode.
Table 38. Multi-pump status (Cont.).
M7.1 - Operation mode (*DM1 Pro).
M7.1.1
Drive 1
ID 2218
Minimum value:
N.A.
Maximum value:
N.A.
Default value:
N.A.
Options:
0 = Offline;
1 = Slave drive; or
2 = Master drive.
Description:
Provides the operating mode of drive 1 while using multi-pump mode.
M7.1. 2
Drive 2
ID 2230
Minimum value:
N.A.
Maximum value:
N.A.
Default value:
N.A.
Options:
0 = Offline;
1 = Slave drive; or
2 = Master drive.
Description:
Provides the operating mode of drive 2 while using multi-pump mode.
M7.1.3
Drive 3
ID 2242
Minimum value:
N.A.
Maximum value:
N.A.
Default value:
N.A.
Options:
0 = Offline;
1 = Slave drive; or
2 = Master drive.
Description:
Provides the operating mode of drive 3 while using multi-pump mode.
M7.1. 4
Drive 4
ID 2254
Minimum value:
N.A.
Maximum value:
N.A.
Default value:
N.A.
Options:
0 = Offline;
1 = Slave drive; or
2 = Master drive.
Description:
Provides the operating mode of drive 4 while using multi-pump mode.
M7.1.5
Drive 5
ID 2266
Minimum value:
N.A.
Maximum value:
N.A.
Default value:
N.A.
Options:
0 = Offline;
1 = Slave drive; or
2 = Master drive.
Description:
Provides the operating mode of drive 5 while using multi-pump mode.
.