Eaton PowerXL DM1 Series - Page 158

148
Chapter 7- Multi-purpose application
POWERXL DM1 SERIES VARIABLE FREQUENCY DRIVES MN040049EN—September 2021 www.eaton.com
Table 54. Monitor (Cont.).
M1 - standard (Cont.).
M1.10
Motor temperature
ID 9
Minimum value:
%
Maximum value:
%
Default value:
%
Description:
Motor temperature value calculated from nameplate values and measured motor current (%).
M1.11
Latest fault code
ID 28
Minimum value:
N.A.
Maximum value:
N.A.
Default value:
N.A.
Description:
Last active fault code value. See fault codes for the value shown here.
M1.12
Instant motor power
ID 1686
Minimum value:
kW
Maximum value:
kW
Default value:
kW
Description:
Instantaneous motor power (kW).
M2 - I/O status.
M2.1
Analog input 1
ID 10
Minimum value:
Varies
Maximum value:
Varies
Default value:
Varies
Description:
Analog input 1 measured value (Vdc or Amps) selectable with dipswitch.
M2.2
Keypad pot voltage
ID 1858
Minimum value:
V
Maximum value:
V
Default value:
V
Description:
Keypad potentiometer measured value (Vdc). DM1 PRO only.
M2.3
Analog output
ID 25
Minimum value:
Varies
Maximum value:
Varies
Default value:
Varies
Description:
Analog output 1 measured value (Vdc or Amps) selectable with parameter.
M2.4
DI1, DI2, DI3
ID 12
Minimum value:
N.A.
Maximum value:
N.A.
Default value:
N.A.
Description:
Digital input 1/2/3 status.
M2.5
DI4
ID 13
Minimum value:
N.A.
Maximum value:
N.A.
Default value:
N.A.
Description:
Digital input 4 status.
M2.6
Virtual DI1, Virtual DI2
ID 1998
Minimum value:
N.A.
Maximum value:
N.A.
Default value:
N.A.
Description:
Virtual digital output status. Internal use, not external output.
The virtual RO1 as virtual DI1 input.
The virtual RO2 as virtual DI2 input.
M2.7
Virtual RO1, Virtual RO2
ID 1817
Minimum value:
N.A.
Maximum value:
N.A.
Default value:
N.A.
Description:
Virtual relay output 1 and 2 status.
M2.8
RO1, RO2
ID 557
Minimum value:
N.A.
Maximum value:
N.A.
Default value:
N.A.
Description:
Relay output 1 and 2 4 status.
M3 - Energy savings
M3.1
b
Energy savings
ID 2120
Minimum value:
Varies
Maximum value:
Varies
Default value:
0.000 varies
Description:
Displays the energy savings of the drive compared to linear V/f curve.