Eaton PowerXL DM1 Series - Page 92

82
Chapter 5 - Fan control application
POWERXL DM1 SERIES VARIABLE FREQUENCY DRIVES MN040049EN—September 2021 www.eaton.com
Table 33. Serial communication (Cont.).
P11.5.6
Protocol status
ID 2612
Minimum value:
N.A.
Maximum value:
N.A.
Default value:
0
Options:
0 = Not configured;
1 = Operational; or
2 = Diagnostics.
Description:
This parameter specifies the protocol status for SWD card.
P11.6 - Bluetooth.
P11.6 .1
Bluetooth enabled
ID 1895
Minimum value:
N.A.
Maximum value:
N.A.
Default value:
0
Options:
0 = Disabled; or
1 = Enabled.
Description:
Bluetooth enabled.
P11.6 .2
b
Bluetooth broadcast mode
ID 2920
Minimum value:
N.A.
Maximum value:
N.A.
Default value:
0
Options:
0 = Off; or
1 = On.
Description:
Bluetooth broadcast mode.
P11.6 .3
Bluetooth pairing reset
ID 2935
Minimum value:
N.A.
Maximum value:
N.A.
Default value:
N.A.
Options:
0 = Not reset; or
1 = Reset.
Description:
Bluetooth pairing reset.
a
Parameter value can only be changed after the drive has stopped.
b
Parameter value will be set to be default when changing macros.
Table 34. Ethernet communication (Cont.).
P12.1 - Basic settings (*DM1 Pro).
P12.1.1
a
IP address mode (*DM1 Pro)
ID 1500
Minimum value:
N.A.
Maximum value:
N.A.
Default value:
0
Options:
0 = Static IP; or
1 = DHCP with AutoIP.
Description:
This parameter defined the IP address configuration mode for EIP/modbus TCP.
P12.1. 2
Active IP address
ID 1507
Minimum value:
N.A.
Maximum value:
N.A.
Default value:
N.A.
Description:
Reads the current active IP address.
P12.1.3
Active subnet mask
ID 1509
Minimum value:
N.A.
Maximum value:
N.A.
Default value:
N.A.
Description:
Reads the current active subnet mask.
P12.1.4
Active default gateway
ID 1511
Minimum value:
N.A.
Maximum value:
N.A.
Default value:
N.A.
Description:
Reads the current active default gateway.
P12.1.5
MAC address
ID 1513
Minimum value:
N.A.
Maximum value:
N.A.
Default value:
N.A.
Description:
Reads the current MAC address.
.