Eaton PowerXL DM1 Series - Page 26

26
Instruction Leaet PUB53675
Effective December 2021
PowerXL DM1 and DM1 Pro series VFD
EATON www.eaton.com
CERTIFICATE OF COMPLIANCE
Certificate Number
A
-E134360
Report Reference
E134360-20200331
Issue Date
2020-APRIL-13
Bruce Mahrenholz, Director North American Certification Program UL LLC Any information and documentation involving UL Mark services are provided on behalf of UL LLC (UL) or any authorized licensee of UL. For questions, please contact a local UL Customer Service Representative at http://ul.com/aboutul/locations/
Page 1 of 2
Issued to:
Eaton W 126 N 7250 FLINT DR MENOMONEE FALLS WI 53051-4404
This certificate confirms that
representative samples of
POWER CONVERSION EQUIPMENT REFER ADDENDUM PAGE FOR MODELS Have been investigated by UL in accordance with the Standard(s) indicated on this Certificate.
Standard(s) for Safety:
UL 61800-5-1 STANDARD FOR ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 5-1: SAFETY REQUIREMENTS - ELECTRICAL, THERMAL
AND ENERGY
CSA C22.2 NO. 274-17 ADJUSTABLE SPEED DRIVES IEC/ EN 61800-5-1 ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS – PART 5-1: SAFETY REQUIREMENTS – ELECTRICAL, THERMAL AND ENERG
Additional Information:
See the UL Online Certifications Directory at https://iq.ulprospector.com for additional information.
This Certificate of Compliance does not provide authorization to apply the UL Mark. Only the UL Follow-Up Services Procedure provides authorization to apply the UL Mark. Only those products bearing the UL Mark should be considered as being UL Certified and covered under UL’s Follow-Up Services. Look for the UL Certification Mark on the product.
CERTIFICATE OF COMPLIANCE
Certificate Number
A
-E134360
Report Reference
E134360-20200331
Issue Date
2020-APRIL-13
Bruce Mahrenholz, Director North American Certification Program UL LLC Any information and documentation involving UL Mark services are provided on behalf of UL LLC (UL) or any authorized licensee of UL. For questions, please contact a local UL Customer Service Representative at http://ul.com/aboutul/locations/
Page 2 of 2
This is to certify that representative samples of the product as specified on this certificate were tested according to the current UL requirements. Enclosed or Open Type Adjustable Speed Drives. Cat. DM1, followed by 3, followed by 4, followed by 1D5, 2D2, 4D3, 5D6, 7D6, 012, 016, 023, 031 or 038, followed by E or N, followed by B or N, followed by S or N, followed by 20, followed by S or B, followed by blank, EM or AP. Enclosed or Open Type Adjustable Speed Drives. Cat. DM1, followed by 3, followed by 2, followed by 1D6, 3D0, 4D8, 7D8, 011, 017, 025, 032 or 048, followed by E or N, followed by B or N, followed by S or N, followed by 20, followed by S or B, followed by blank, EM or AP. Accessories, NEMA 1 Kits, for upgrading Open Type to Type 1 Enclosure, Models DXM-ACC- FR1N1KIT, DXM-ACC-FR2N1KIT, DXM-ACC-FR3N1KIT, DXM-ACC-FR4N1KIT. Accessories, PROFIBUS Module, Model No. DXM-NET-PROFIBUS. Accessories, CANOPEN Module, Model No. DXM-NET-CANOPEN. Accessories, SMARTWIRE Module, Model No. DXG-NET-SWD-IP20 and DXG-NET-SWD-IP54. Accessories, Standard Keypad , Model No. DXG-KEY-LCD. Accessories, Remote Keypad, Model No. DXG-KEY-RMTKIT. Accessories, Remote Keypad Mounting Holder, Model No. DXG-KEY-HOLDER and DXG-KEY- HOLDER-BP. Accessories, Software Cable, Model No. DXG-CBL-PCCABLE.