Eaton Corporation Page 35 Ver 1.1
Figure 6.2.12: Connecting mode for data logger
l) Connect to PC via Super-485 to RS-232 converter
When wiring Super-485 card from Inverter to Super-485 to RS-232
Converter, connect opposite pins of Super-485 (Receive Pin to Transmit
Pin, and Transmit Pin to Receive Pin). See framed area below.
Figure 6.2.13: Connecting Mode for RS485 with RS232
IMPORTANT
For further instructions, a SUPER-RS485 manual is available
with a detailed configuration that can be used by qualified service
personnel or system installer. Please contact the supplier in order
to obtain this user manual as the reference.
To Next Page
Loading...
