Eaton Corporation Page 34 Ver 1.1
Figure 6.2.10: Mixed Connecting Mode
J) Multiple Connections: Terminal Block Usage
The terminal block that designed for the SUPER RS485 card is used
with twisted wire pairs to establish the connection between each PV
Inverter as shown in figure 6.2.11.
Figure 6.2.11: Twisted Wires Connecting Model
K) Connect to Data Logger
When wiring the Super-485 card from PV Inverter to PV Inverter, please
connect the same pin of the Super-485 card (Receive Pin to Receive
Pin and Transmit Pin to Transmit Pin) as figure shown in 6.2.12:
To Next Page
Loading...
