User manual SEFELEC 5x Series 155 v1.06
To make the correspondence between the memory numbers and the Sequence file names, go
to the sequence menu (see Chapter 11 - Sequence mode) and press the PLC key (the PLC in-
terface must be selected in the General settings menu):
To display the following correspondence table:
Display the memory number by swiping the screen toward the top or pressing the vertical scroll
bar on the left of the screen. On the line of the selected memory number, press the area in yel-
low (File Name) to view the list of names of available Sequence files. Choose the file by pressing
its name. It is now associated with the memory number.
To Next Page
Loading...
