Eaton Sefelec DXS56 - Configuring the Connexion on the Unit

XS series operating manual
XS user manual v0.55 - 114 -
On the the last two forms opened , strike OK..
Configuring the connexion on the unit
In the menu CONFIG, sélect ETHERNET on line INTERFACE
Fig 12.3
You can see the button ETHER.in the right upper corner of the screen
Fig 12.4
press on ETHER.and wait a little time until the unit identifies the connexion .
Display shows:
Fig 12.5
The values depend on the configuration chosen.