Eberspächer Easystart Remote + - Enter Vehicle Engine Size for Auto Calculation; Enter Operating Time for Auto Calculation

16 | VEHICLE HEATERS – TECHNICAL DOCUMENTATION
3 INITIAL STARTUP
FOR AUTOMATIC OPERATING TIME CALCU-
LATION, COPY THE VEHICLE'S ENGINE SIZE
(CUBIC CAPACITY) – ITEM 11.2:
Default: 1800 cm
3
Use the or button to select Item
11.2: and confirm by pressing the button.
Use the
or button to enter the engine
size in 100 cm
3
increments.
Setting range: 1000 cm
3
to 4000 cm
3
.
11.2: 1800
SERVICE
Press the button to confirm the setting.
FOR AUTOMATIC OPERATING TIME CALCULA-
TION, ENTER THE OPERATING TIME– ITEM
11.3:
Default: 60 minutes
Use the
or button to select Item
11.3: and confirm by pressing the button.
Use the
or button to set the operat-
ing time.
Setting range: 10 – 60 minutes.
11.3: 60
SERVICE
Press the button to confirm the setting.
PLEASE NOTE!
 Press the button to exit the Workshop
menu.
 Carry out a function test after configura-
tion. If an error or fault occurs, refer to the
chapter “What to do if ...?” from page 17