Ebyte E104-BT52 - 6.4.17 AT+MINOR iBeacon Minor command; 6.4.18 AT+IPWR revise ibeacn tx_power; 6.4.19 AT+NAME advertising device name; 6.4.20 AT+CONINTV connection interval configuration

Copyright ©2012–2022，Chengdu Ebyte Electronic Technology Co.,Ltd
18
6.4.17 AT+MINOR iBeacon Minor command
Command
Response
Inquiry
AT+Minor?
+OK=[para]
Set
AT+Minor=[para]
+OK：success
+ERR=[NUM]：error
Parameter
para(ACSII)
：
0X0001-0XFFFF
default
：
Note
1. Take effect immediately (if the broadcast is not turned on, or it is connected, it will take effect next time),
save when power off;
2. Only the slave device supports broadcasting, other roles can still be configured;
6.4.18 AT+IPWR revise ibeacn tx_power
Command
Response
Inquiry
AT+IPWR?
+OK=[para]
Set
AT+ IPWR =[para]
+OK：success
+ERR=[NUM]：error
Parameter
para(HEX)： 0-0XFF
default：0
Note
1. Take effect immediately (if the broadcast is not turned on, or it is connected, it will take effect next time),
save when power off;
2. Only the slave device supports broadcasting, other roles can still be configured;
6.4.19 AT+NAME advertising device name
Command
Response
Inquiry
AT+NAME?
+OK=[para]
Set
AT+NAME=[para]
+OK
：
success
+ERR=[NUM]
：
error
Set
（Do not save）
AT+NAME1=[para]
Parameter
para(HEX): advertising device name,
Advertising device name is not more than 22 bytes
default：E104-BT52-V2.0
Note
1. Take effect immediately, save when power off;
2. Only supported by the slave, other roles can still be configured;
6.4.20 AT+ CONINTV connection interval configuration
Command
Response