Copyright ©2012–2022，Chengdu Ebyte Electronic Technology Co.,Ltd
The master auto connects and prints once powered on
The slave auto connects and prints once powered on
4.The master sends data “0123456789” to the slave，the slave receives “0123456789”, as shown below；
5.The slave sends data “abcdefghijk” to the master，the master receives “abcdefghijk”, as shown below；
The master sends transparent data
7.2.2 Format transmission
1. Same as Step 1 of 7.2.1 Data Transparent Transmission;
2. Set to format transmission (default format transmission, set command "AT+TRANMD=0")
3. Same as Step 3 of 7.2.1 Data Transparent Transmission;
4. The effective data sent by the master to the slave is "0123456789" (ASCII). The format transmission data is
packed "00 30 31 32 33 34 35 36 37 38 39" (HEX). At this time, the data received by the slave is "0123456789"
("30 31 32 33 34 35 36 37 38 39"). Such
as
To Next Page
Loading...
