22
Specifications
Specifications
These specifications are subject to change without notice.
DSRM-300
External dimensions:
Length × Width × Height 1830 × 350 × 280 mm
Mass:
Unit without cutting attachment, harness battery pack and guard
Unit with cutting attachment, harness battery pack and guard
3.6 kg
5.3 kg
Cutting attachment:
Nylon line cutting head
Line diameter
Line length
Thread
Cutting width
G138
2.0 mm
2 × 1 m line
Left-handed M10 x 1.25
350 mm
Gear ratio 2.93
Rotational direction of output shaft seen from above: Anticlockwise
Battery:
Type
Pack voltage
Charger type
Charger input voltage
Li-ion
56 Volts (rated 50.4 V)
CCCV
230 - 240 Volts AC
Battery Charger Lights: Red LED – Battery is outside charging temperature range
Red LED Blinking – Fault
Green LED – Battery finished charging
Green LED Blinking – Battery is charging normally
Charge Time: LBP-560-100 battery: Approximately 42 minutes.
LBP-560-200 battery: Approximately 88 minutes.
Vibration levels: (EN50636-2-91) Front handle 1.6 m/s
2
Rear handle 1.4 m/s
2
Uncertainty 1.5 m/s
2
Sound pressure level: (EN50636-2-91)
Sound power level: (EN50636-2-91)
Uncertainty
80.9 dB(A)
92.4 dB(A)
3.0 dB(A)
Guaranteed sound power level: (2000/14/EC, amended by 2005/
88/EC)
96 dB(A)
To Next Page
Loading...
Need help?
General