Echo GT-200 User Manual

Grass Trimmer
Operator's Manual
MODEL GT-200
WARNING DANGER
READ RULES FOR SAFE OPERATION AND INSTRUCTIONS CAREFULLY. ECHO PROVIDES AN
OPERATOR'S MANUAL AND A SAFETY MANUAL. BOTH MUST BE READ AND UNDERSTOOD FOR
PROPER AND SAFE OPERATION.
X750009930
12/06
X7502024800

Echo GT-200 Specifications

General

Engine Displacement	21.2 cc
Shaft Type	Straight
Engine Type	2-Stroke
Power Source	Gasoline
Fuel Tank Capacity	11.8 fl oz
Cutting Width	16 in
Warranty	5 years consumer, 2 years commercial

Summary

INTRODUCTION

The Operator's Manual

Explains the content and purpose of the operator's manual for future reference.

The Safety Manual

Explains the content and purpose of the safety manual for future reference.

SAFETY

Manual Safety Symbols and Important Information

Explains safety alerts, symbols, and keywords used throughout the manual and on the product.

International Symbols

Provides a guide to international symbols used for safety and operation instructions.

Personal Condition and Safety Equipment

Emphasizes the importance of operator's condition and required safety gear for safe operation.

OPERATOR SAFETY AND COMFORT

Physical Condition

Details how fatigue, medication, alcohol, or drugs can affect judgment and dexterity for operation.

Eye Protection

Specifies the requirement for wearing eye protection meeting ANSI Z87.1 or CE standards.

Hand Protection

Recommends wearing no-slip, heavy-duty work gloves for grip and vibration reduction.

Hearing Protection

Recommends wearing hearing protection when the unit is used.

Proper Clothing

Outlines recommended durable clothing, including long pants, long sleeves, and closed-toe shoes.

Hot Humid Weather

Advises on managing operator fatigue in hot and humid conditions.

Vibration and Cold

Discusses Raynaud's Phenomenon and precautions against vibration and cold exposure.

OPERATIONAL SAFETY PRACTICES

Repetitive Stress Injuries (RSI)

Explains risks of RSI/CTS from repetitive motions and vibration, providing preventative measures.

Clear the Work Area

Instructs to keep spectators and helpers at a safe distance (15 m / 50 ft.).

Keep a Firm Grip

Advises to hold handles firmly with both hands for control.

Keep a Solid Stance

Emphasizes maintaining balance and footing on stable surfaces.

Avoid Hot Surfaces

Warns to keep exhaust areas clear of debris and avoid contact with hot parts.

EQUIPMENT

General Equipment Checks

Lists essential pre-operation checks for unit safety and function, including fasteners, fuel leaks, and attachments.

Emission Control System

Describes the engine's emission control system (EM/TWC, EVAP) and compliance period.

DESCRIPTION

Safety Decals Identification

Instructs users to locate, understand, and maintain the legibility of safety decals on the unit.

Unit Component Identification

Provides a visual diagram identifying key parts of the grass trimmer with corresponding numbers.

COMPONENT IDENTIFICATION

Engine & Controls

Covers the power head, throttle trigger, stop switch, choke, and starter system.

Fuel & Air Systems

Includes fuel tank, cap, purge bulb, and air cleaner.

Cutting & Drive Components

Details the driveshaft, nylon cutter head, debris shield, and cut-off knife.

Handles & Guards

Covers the front and rear grips, and the top guard.

ASSEMBLY

Tools and Parts Required

Lists the necessary tools and parts for assembly tasks.

Plastic Shield Installation

Provides step-by-step instructions for installing the plastic debris shield.

NYLON LINE HEAD INSTALLATION

Securing the Cutting Attachment

Details the process of aligning and threading the cutting attachment onto the shaft.

FRONT (LOOP) HANDLE ADJUSTMENT

Positioning for Comfort

Guides on repositioning and tightening the front handle for optimal operating posture.

FUEL GUIDELINES

Approved Fuel Types Warning

Warns against using unapproved fuels like E-20/E-85, which can damage components.

FUEL REQUIREMENTS AND HANDLING

Gasoline and Oil Specifications

Specifies required gasoline octane and two-stroke oil standards for optimal performance.

Safe Fuel Mixing and Storage

Provides critical safety warnings for handling fuel and step-by-step mixing instructions.

STARTING A COLD ENGINE

Pre-Start Checks and Priming

Covers stop switch, choke setting, and purge bulb operation before starting.

Recoil Starter Technique

Explains the correct pulling method for the recoil starter to ignite the engine.

Engine Warm-up Procedure

Guides on adjusting choke and throttle for engine warm-up after starting.

STARTING A WARM ENGINE

Warm Start Procedure

Outlines the starting steps for a warm engine, omitting choke use.

Idle Speed Safety

Warns about potential injury if the attachment moves at idle speed.

STOPPING THE ENGINE

Normal Shutdown

Provides instructions to release throttle and use the stop switch to turn off the engine.

Emergency Stop Method

Describes using the choke to stall the engine if the stop switch fails.

MAINTENANCE OVERVIEW

Skill Level Guide

Classifies maintenance tasks by required skill level (1, 2, 3).

Scheduled Maintenance Intervals

Presents a chart detailing maintenance procedures and their recommended intervals for various components.

AIR FILTER MAINTENANCE

Cleaning and Replacement Steps

Step-by-step instructions for cleaning or replacing the air filter to ensure proper engine function.

FUEL FILTER REPLACEMENT

Fuel Line Filter Service

Guides on how to remove and install a new fuel filter using a wire hook.

SPARK PLUG SERVICE

Spark Plug Inspection and Adjustment

Details inspecting, cleaning, replacing, and gapping the spark plug for optimal ignition.

COOLING SYSTEM MAINTENANCE

Cleaning Cooling Fins

Explains how to clean cooling fins to prevent overheating and engine seizure by ensuring airflow.

EXHAUST SYSTEM MAINTENANCE

Spark Arrestor Screen Service

Instructions for removing, cleaning, and replacing the spark arrestor screen to maintain performance.

CYLINDER EXHAUST PORT SERVICE

Professional Cleaning Recommendation

Recommends professional cleaning of the cylinder exhaust port for emission compliance and engine longevity.

CARBURETOR ADJUSTMENT

Idle Speed Adjustment Procedure

Guides on adjusting the idle speed using a screwdriver and tachometer for optimal engine operation.

LUBRICATION PROCEDURES

Drive Shaft Greasing

Instructions for lubricating the flexible drive shaft and bearing housing to ensure smooth operation.

NYLON LINE REPLACEMENT

Spooling and Winding Line

Detailed steps for removing the spool and winding new nylon trimmer line.

NYLON LINE REPLACEMENT (CONT.)

Spool and Housing Assembly

Guides on placing the spool, threading lines, and securing the cover.

Line Advance Test

Explains how to test the line advance mechanism after assembly.

TROUBLESHOOTING

Engine Cranks - Starts Hard/Doesn't Start

Lists common problems, checks, causes, and remedies for engine starting issues.

Engine Runs Poorly or Dies

Provides troubleshooting steps for engines that run poorly or lack acceleration.

Engine Does Not Crank

Addresses issues where the engine fails to crank at all.

STORAGE

Long Term Storage Procedures

Details essential maintenance steps for storing the unit for 30 days or longer.

SPECIFICATIONS

Model GT-200 Specifications

Lists detailed technical specifications for the GT-200 grass trimmer.

SERVICING INFORMATION

Parts and Serial Number

Explains how to obtain genuine parts and locate unit identification numbers.

Service and Warranty Registration

Guides on where to get service and the importance of registering the warranty.

Consumer Product Support

Provides contact information for ECHO Consumer Product Support.

Additional or Replacement Manuals

Explains how to obtain additional manuals and safety videos.