EasyManua.ls Logo

Echo GT-200 - SPECIFICATIONS; Model GT-200 Specifications

Echo GT-200
24 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
GRASS TRIMMER
OPERATOR'S MANUAL
23
MODEL ------------------------------------------ GT-200
Length-------------------------------------------- 1400 mm (55.1 in.)
Width--------------------------------------------- 310 mm (12.2 in.)
Height -------------------------------------------- 385 mm (15.2 in.)
Weight (dry) w/Cutter Head ------------------- 4.1 kg (9.04 lb.)
Engine Type ------------------------------------- Air cooled, two-stroke, single cylinder gasoline engine
Bore----------------------------------------------- 32.2 mm (1.27 in.)
Stroke--------------------------------------------- 26.0 mm (1.02 in.)
Displacement ------------------------------------ 21.2 cc (1.29 cu. in.)
Exhaust System --------------------------------- Spark Arrestor Muffler
Carburetor --------------------------------------- Zama diaphragm model w/primer
Ignition System --------------------------------- Flywheel magneto, capacitor discharge
Spark Plug --------------------------------------- NGK BPMR-8Y Gap 0.65 mm (0.026 in.)
Fuel ----------------------------------------------- Mixed (Gasoline and Two-stroke Oil)
Fuel/Oil Ratio ------------------------------------ 50:1 two-stroke air cooled engine oil
Gasoline ------------------------------------------ 89 Octane unleaded. DO NOT use fuel containing methyl alcohol, more than
10% ethyl alcohol or 15% MTBE.
Oil ------------------------------------------------- Power Blend
TM
Premium Universal 2-Stroke Oil
Fuel Tank Capacity ----------------------------- 0.45 lit. (15.2 US fl. oz.)
Starter System ----------------------------------- i30 Automatic Rewind Starter
Clutch -------------------------------------------- Centrifugal Type
Drive Shaft --------------------------------------- 1/4 in. Flex Shaft
Rotating Direction ------------------------------ Clockwise viewed from top
Cutter Head -------------------------------------- Nylon line head with .080 in. line capacity 4.6 m (19 ft.)
Handle -------------------------------------------- Left - D-Loop, Right - Grip
Shoulder Harness ------------------------------- Optional P/N 99944200201
Idle Speed (RPM) ------------------------------- 2,750 - 3,250 RPM
Clutch Engagement Speed (RPM) ------------ 3,500 - 4,100
Wide Open Throttle Speed (W.O.T.)
with Nylon Line Head (RPM) ----------------- 7,500 - 8,500 RPM
SPECIFICATIONS
IMPORTANT
This spark ignition system complies with Canadian ICES-002

Related product manuals