9
Before you start
Before you start
Packing list
Assembly
Loop handle assembly
Position handle (A) in comfortable operating position and tighten
screws (M5×35) (B). The cutting attachment should be 5 - 7.5 cm
above the ground and as level as possible.
The following parts are packed separately in the packing box.
When you have unpacked the box, please check the parts that it contains.
Contact your dealer if anything is missing or broken.
1. Engine and shaft tube
2. Wing nut
3. Washer
4. Bolt
5. Shield
6. Nylon line cutting head
7. Operator's manual
8. Loop handle
9. Safety goggles (ANSI Z 87.1 compliant)
10. Caution tag
11. Locking tool
12. Socket wrench
13. L-wrench
WARNING
Read the operator's manual carefully to ensure that you assemble the product correctly.
Using a product that has been incorrectly assembled could lead to an accident or serious injury.
To Next Page
Loading...
Need help?
General
